Points to Note When Using a Small Foundation Pile Driver

1. Lubrication of the Winch: Apply grease to the winch every two days.

2. Adding Weight: To increase the weight of the pile driver, add materials such as sand, iron powder, or stones to the shovel and the hammer.

3. Regular Inspection of Steel Ropes: Inspect the steel ropes regularly and replace them immediately if any issues are found.

4. Checking Screws on Tripod Top Support Pulley: Regularly check the screws on the tripod top support pulley and tighten them if any problems are detected.

5. Shutting Down Safely: When the small foundation pile driver stops operating, immediately turn off the power and conduct a safety inspection of the machine.

6. Long-term Storage: If the pile driver is not used for an extended period, store it in a warehouse, take moisture-proof measures for the motor, and remove the control panel instruments to store them in a moisture-proof box.

7. Inspecting Bearings: Regularly check the temperature of the bearings and the tightness of the bearing cap screws. Pay particular attention to the connection screws of the eccentric iron block to prevent accidents.

8. Safety During Operation: Ensure that no one stands around the pile driver during operation.