The types of pile drivers are not too numerous but not too few either, including guardrail pile drivers, foundation pile drivers, solar photovoltaic pile drivers, screw pile drivers, wheeled pile drivers, and crawler pile drivers. Shandong Hengwang Group's foundation pile drivers are not only used for building foundations but also for bridge construction and road paving. The foundation pile driver addresses the issues of large size and heaviness found in existing pile drivers, which cannot be used in narrow spaces. Furthermore, foundation pile drivers have the advantages of low investment, high returns, high efficiency, small size, light weight, simple operation, convenient construction, and good quality of the pile holes produced. Shandong Hengwang Group's foundation pile driver features a scientific and reasonable structure, simple operation, and costs only a tenth of large hydraulic pile drivers, making it the first choice for urban and rural construction teams.

Installation instructions for the foundation pile driver:

1. First, connect the double-column A-frame of the tripod to the base using a horizontal rod, then connect the two single-column frames to the double-column A-frame to form a triangular support. At this point, the tripod installation is complete.

2. Connect one end of the steel wire rope wound on the winch to the shovel head through the top pulley of the tripod. At this point, the shovel head installation is complete.

3. By adjusting the winch, raise the shovel head to the appropriate height, then release the clutch rod, allowing the shovel head to penetrate the soil. Adjust the winch again to lift the shovel head buried in the soil and place a dirt container directly below it. By shaking the clutch rod of the winch, the shovel head can release the soil, completing one usage cycle.

Precautions for the foundation pile driver:

1. Grease the winch every one or two days.

2. Add a suitable amount of filler (e.g., sand, iron powder, stones) to the shovel head and ram to achieve sufficient weight.

3. Regularly check the steel wire rope and replace it timely if it is damaged.

4. Check the screws at the top support pulley of the tripod daily, and tighten any loose screws to prevent accidents.

Everyone is welcome to visit the Shandong Hengwang Group factory or purchase online, with quick delivery and quality assurance.