The power structure of the hydraulic pile driver is equipped with an advanced end-distribution hydraulic motor, featuring a strong auto-correction function after wear to ensure high volumetric efficiency, stable motor speed, and consistent load speed characteristics. It can withstand high working pressure and output torque. The advanced rotary shaft seal design can handle high back pressure, and the tapered roller bearing structure can endure both axial and radial loads, allowing the motor to directly drive the working structure. This has expanded its range of applications.

For users, it is essential to pay attention to both the operational and maintenance advantages of the structure when using this device. How much do you know about hydraulic pile drivers? Let's explore some maintenance knowledge shared by hydraulic pile driver manufacturers.

1. Use the correct maintenance tools.

2. Keep hydraulic components clean, as dust is the main culprit for hydraulic system failures.

3. Hydraulic pile driver components should be stored in a clean place and washed with hydraulic oil before use. Do not use steam, paint, water, or acid for cleaning.

4. Before each use, check if the high-pressure or low-pressure oil hoses of the hydraulic pile driver are loose, and regularly inspect for oil leaks in other areas to prevent hoses from coming off due to vibration.

5. Clean seals such as O-rings and gaskets with hydraulic oil before installation, and lubricate sliding surfaces, especially for some hydraulic installation parts.

6. Lubricate the working tools before and after continuous operation for two to three hours.