Nowadays, an increasing number of people recognize the substantial economic value of pile drivers and wish to work in this field. However, some customers are still hesitant and concerned about the performance, quality, and practicality of operation, which becomes a worry for users. The issue is, today, everyone is a part of Shandong Hengwang Group, here to explain the methods of using a pile driver. The work is not difficult, please listen carefully. To understand how to use a compact pile driver, you first need to know the components of a pile driver. Typically, a small pile driver mainly consists of a pile hammer, pile frame, and auxiliary equipment. Specifically, it includes a winch, tripod, base seat, motor, shovel head, rammer, and steel wire rope. The structure is not very complicated, making it easy to learn and convenient. In use, the double-column ladder of the tripod must be connected to the base with crossbars. After connecting, connect the two single-column frames on the tripod to the double-column ladder. Before the tripod is installed, set up the tripod support and ensure it is firmly installed; otherwise, it's dangerous. In the second phase, one end of the steel wire rope wound on the hoist is connected to the shovel head at the top of the tripod.

Then, adjust the rising hoist according to the equipment's height and the soil of the foundation to raise the shovel head to the appropriate height, then release the release rod, which may cause the shovel head to fall into the soil. Readjust the hoist to lift the shovel head into the soil, then place it in the dirt container directly below the shovel head. The lift head can be used to release the shovel head from the shovel for one cycle. Then, you can continue to cycle according to this method. However, there are some things to know during use. Firstly, the hoist should be filled with grease every two days. Next, put an appropriate amount of filler (sand, iron powder, stone, etc.) in the shovel head and use a hammer to make it heavy enough. Also, regularly check the steel wire rope to prevent accidents. The working principle of the compact pile driver is as follows. It's quite simple.