Whether it's a solar photovoltaic drilling machine or a loader-mounted guardrail pile driver, the drill bit is, of course, very important. Wear on the drill bit is a normal phenomenon. However, when abnormal wear occurs, we need to identify the reasons and try to avoid them. Today, the pile drilling machine manufacturer will explain the precautions for using the solar photovoltaic drilling machine:

1. After starting the engine, it should run at low speed for 3-5 minutes, and the power head should be rotated under no load to facilitate the normal operation of the hydraulic system.

2. During the operation of the drilling machine, the operator should frequently observe whether the indications of various instruments are normal. If there are any abnormal situations, stop and check immediately.

3. When operating, pay special attention to ensuring the control handles are correctly positioned to avoid causing pressure shocks to the system.

4. During use, check and tighten the pipe joints and oil pump bolts that are subject to pressure vibrations, ensuring there are no oil or air leaks.

5. When the solar photovoltaic drilling machine is moving, it must be directed by a specific person, especially paying attention to dangerous areas such as high-voltage lines and water pits.

6. It is strictly forbidden for people to stand within the rotation range of the drilling machine.

7. After the solar photovoltaic drilling machine is transferred, the tracks of the flatbed truck must be immediately extended for walking.

8. When checking the hydraulic oil, it must be done after the hydraulic oil has cooled down.

9. When welding drilling rod components, the power switch must be turned off.

10. Regularly check the rotary joint.